SafeEndo ReCreate LC 7 KIT

Key specifications, dimensions and weight

Features and benefits

• Nano-hybrid filler technology balances the wear resistance needed posteriorly against the polish retention needed anteriorly, so one material covers the whole mouth; low polymerisation shrinkage reduces cuspal deflection and marginal gap formation; excellent sculptability that holds anatomy without slumping; radiopaque for clear radiographic assessment; shade range covers the great majority of Indian clinical cases; polishes to a high lustre and retains it. The included 7th generation self-etch adhesive cuts the bonding procedure to a single step with no rinsing, reducing chair time and post-operative sensitivity; the 8 g polishing paste completes the workflow through to final gloss, which is what determines both the aesthetic result and long-term plaque resistance; the four included shades cover most routine cases.

Directions to use

Select the shade before isolation while the tooth is still hydrated, and check it against an adjacent tooth in natural light. Isolate, preferably with a rubber dam. Apply the all-in-one self-etch adhesive and actively agitate it into the preparation for the time stated in the IFU, air-thin thoroughly to evaporate the solvent, then light-cure. Consider selectively etching the enamel margins first. Place the composite in increments no thicker than 2 mm, adapting each carefully to the cavity walls, and light-cure each increment for the time appropriate to your curing light output. Finish with graded discs and polishing points and check the occlusion in centric and excursive movements. Recap syringes immediately and store away from operatory light. Confirm exact composition, setting times and contraindications against the SafeEndo IFU before publishing. Complete the restoration with the supplied polishing paste on a soft cup or point at low speed with intermittent pressure until a high gloss is achieved.