SafeEndo Smart Prep Liquid 100ml (EDTA Liquid)
SafeEndo Smart Prep Liquid — a 17% EDTA solution in a 100 ml bottle, used as the final rinse before obturation to remove the smear layer created by instrumentation.
Key specifications, dimensions and weight
- Properties
- 17% EDTA chelating solution for final rinse and smear layer removal; 100 ml bottle; MRP ₹450.00
- length
- 140
- width
- 55
- height
- 55
- weight
- 145
Features and benefits
- Chelates calcium to remove the inorganic component of the smear layer, which sodium hypochlorite cannot touch — the two are complementary and neither alone leaves a clean canal wall; opens the dentinal tubules so irrigants, medicaments and sealer contact clean dentine, which directly improves the quality of the seal; lubricates the file and softens the canal wall, easing negotiation of narrow and calcified canals and reducing the torque demand on rotary files; helps prevent ledging and blockage during instrumentation. The liquid form is what the evidence base for final-rinse smear layer removal actually rests on — a one-minute EDTA solution rinse followed by hypochlorite is the standard protocol, and a gel cannot achieve the same volume exchange; the 100 ml bottle is economical and dispenses readily into an irrigation syringe.
Directions to use
After completing chemo-mechanical preparation, irrigate with EDTA solution using a side-vented needle placed passively 2–3 mm short of working length. Leave in the canal for approximately one minute — longer contact causes excessive peritubular dentine erosion. Follow with a final rinse of sodium hypochlorite, then flush with saline or sterile water. Do not mix EDTA and hypochlorite in the canal, as EDTA rapidly inactivates the hypochlorite. Dry with paper points before placing sealer. Keep the bottle closed; store at room temperature. Confirm exact composition, setting times and contraindications against the SafeEndo IFU before publishing.